Hey everyone. You may be interested in mounting the ON THE GO water softener inside. Here’s how you can do it. Love the result.
PLEASE NOTE: Coupon Code and Links below.
This is a sponsored video by ON THE GO, and you can find a coupon code and a link to get a discount directly from their site.
-
USE coupon code: RVLivingLIFE to save 10 percent at On the go Official site.(link)
-
Water meter. (link)
-
Stainless Steel Hose. (link)
-
Quick Connects. (link)
-
Hose bib. (link)
-
Camco Water Filter. (link)
Please note: Any link you click on or social media sites may be an affiliate link where we may make a small commission if you make a purchase after clicking at no cost to you. Thank you for your support. Hey there! In this article, we’re going to show you how to mount the ON THE GO water softener inside your RV. We understand that constantly moving the water softener in and out can be a hassle, so we found a way to simplify things for you. By attaching the softener to the wall and using quick connects, you’ll be able to easily remove and flush it when needed. We’ll also guide you on how to install faucets with on/off switches and connect them to the softener for better control. Plus, we’ll share a water test result and recommend high-quality stainless steel hoses for the setup. By the end of this article, you’ll have a secure and efficient water softening system inside your RV. Stay tuned!
Moving the ON THE GO water softener inside your RV is a great way to streamline your water filtration process. This article will guide you step-by-step as we demonstrate the mounting process and offer helpful tips along the way. We’ll show you how to remove unnecessary equipment, install faucets with on/off switches, and connect the softener using high-quality stainless steel hoses. With these modifications, you’ll have a secure and effective water softening system on the go. So, let’s get started and make your RV water experience even better!
Mounting the ON THE GO Water Softener Inside
Introduction
Are you tired of the hassle of constantly moving your ON THE GO water softener in and out of your RV? Mounting it inside your vehicle can provide a convenient solution. In this article, we will guide you through the process of mounting your water softener inside, highlighting the benefits and providing step-by-step instructions. Say goodbye to the inconvenience of constantly removing and reinstalling your water softener, and enjoy the ease of having it permanently mounted in your RV.
Benefits of Mounting the Water Softener Inside
There are several advantages to mounting your water softener inside your RV. Firstly, it eliminates the need to constantly remove and reinstall the softener when you’re on the move. This saves you time and effort, allowing you to focus on enjoying your travels. Additionally, having the softener inside reduces the risk of damage from external factors such as extreme weather conditions or accidental bumps. Finally, mounting the softener inside ensures easy access and prevents any potential theft or tampering.
Tools and Materials Needed
Before you begin the installation process, gather the necessary tools and materials:
- Water meter
- Stainless Steel Hose
- Quick Connects
- Hose bib
- Camco Water Filter
- Screws (appropriate size for mounting faucets)
- Strap or other securing method
Preparing the Installation Area
Start by preparing the installation area inside your RV. Remove any unnecessary components, such as the existing whole house filter or any temperature thermostats that may be obstructing the mounting space. Clearing the area will provide a clean and open space for securing the water softener.
Removing Unnecessary Components
Next, remove the hardware that held the previous components in place. This may include screws, brackets, or any other mounting mechanisms. Ensure that the area is completely cleared before proceeding to the next steps.
Choosing the Location for Mounting
Carefully choose the location where you want to mount the water softener inside your RV. Ideally, find a spot that is easily accessible and away from any potential obstructions. Consider factors such as the height of the spot, ease of connecting hoses, and proximity to the water source. Once you have selected the location, mark the positions where you will mount the faucets onto the wall.
Installing Quick Connects
To allow for easy removal and reinstallation of the water softener, install quick connects on the hoses. These quick connects will ensure a secure connection while also providing the flexibility to detach the softener when needed. Follow the manufacturer’s instructions to properly install the quick connects on the hoses.
Attaching Faucets to the Wall
Using the marked positions as a guide, mount the faucets onto the wall. Ensure that the faucets are securely attached using screws appropriate for the wall material of your RV. Double-check that the faucets are level and aligned properly.
Connecting the Hoses
Once the faucets are securely mounted, connect the hoses to them. Ensure a tight and secure connection, but be careful not to overtighten, as this may cause damage to the hoses or faucets.
Securing the Softener in Place
To prevent any movement or potential damage while on the road, secure the water softener in place using a strap or other means. The strap should be placed around the neck of the bottle and attached to the RV’s interior, such as through existing holes in the wall. The strap should be tight enough to keep the softener in place, but not overly tight to avoid damaging the bottle.
Testing and Checking for Leaks
Before using the mounted water softener, it is crucial to test and check for any leaks. Open the water source and check that water is flowing correctly through the hoses and into the softener. Inspect all connections for any signs of leaks, and tighten them if necessary. Ensure that there are no leaks or water seepage before considering the installation process complete.
Conclusion
Mounting your ON THE GO water softener inside your RV is a convenient and practical solution to eliminate the constant need for removal and reinstallation. The process involves preparing the installation area, removing unnecessary components, choosing a suitable location, installing quick connects and faucets, connecting the hoses, and securing the softener in place. Finally, thoroughly test the system for any leaks and ensure that everything is in working order. With your water softener permanently mounted inside your RV, you can enjoy the benefits of soft water without the hassle. So say goodbye to the inconvenience and hello to an easier, more efficient water softener setup in your RV!