I have noticed that there are a few individuals who have created videos about changing the boiler fluid in an Aquahot system, but it seems like they haven’t done it as effectively as they could have. In this short video, I will show you the correct way to change the fluid and provide some helpful tips based on where others have gone wrong towards the end of the video.
I used to firmly believe that the boiler fluid in the Aquahot system never needed to be replaced. However, I recently came across a service maintenance schedule for the Oasis system that changed my perspective. On line G of the schedule, it clearly recommends replacing the coolant every three years. Since the Aquahot and Oasis systems use the same fluid and my fluid is already 9 years old, I believe it’s better to be safe than sorry.
You can find the Oasis Maintenance Schedule by following this link: Oasis Maintenance Schedule
Additionally, if you need to purchase Century Transfer fluid, you can find it here: Century Transfer fluid
Please note that any links provided in our content might be affiliate links, which means we may earn a small commission at no cost to you if you make a purchase. Your support is greatly appreciated. Hey there! In this video, RVLivingLIFE shows you the importance of changing the boiler fluid in an Aquahot system correctly. They emphasize the need for following a service maintenance schedule and mention tips for a successful fluid change. The narrator demonstrates the process of draining the old fluid, refilling with distilled water, and adding the new Century fluid. They recommend running the Aqua Hot system for proper mixing of the fluid. Overall, it’s a straightforward job that takes a couple of hours, and they provide all the necessary steps to do it right.
So, if you’re looking to change the boiler fluid in your Aquahot system and want to ensure a proper mixing of the fluid, this video is for you. Follow along as RVLivingLIFE walks you through the process step by step and provides helpful tips along the way. Don’t forget to check out the service maintenance schedule and give your Aquahot system the care it deserves. Happy fluid changing!
Importance of Running the Aqua Hot System for Proper Mixing of Fluid
The Importance of Changing the Fluid Correctly
Changing the fluid in your Aqua Hot system is an important maintenance task that should not be overlooked. Over time, the fluid can become contaminated or break down, which can lead to decreased performance and potential damage to the system. By changing the fluid regularly and correctly, you can ensure that your Aqua Hot system continues to operate efficiently and effectively.
Tips for Changing the Fluid Efficiently
When it comes to changing the fluid in your Aqua Hot system, there are a few tips that can help you do it efficiently. First, make sure you have all the necessary tools and supplies before you begin. This includes distilled water, the new Century transfer fluid, clear plastic hoses, gallon jugs, and any other materials recommended by the manufacturer.
Next, take the time to properly drain the old fluid from the system. Follow the instructions provided by the manufacturer to ensure that all the old fluid is safely removed. It’s important to be cautious when draining the fluid, as it can be hot and cause burns. Use a rag or gloves to protect your hands and exercise caution throughout the process.
Service Maintenance Schedule for the Oasis System
It’s always a good idea to refer to the service maintenance schedule provided by the manufacturer. In this case, the narrator mentions finding a service maintenance schedule for the Oasis system, which recommends replacing the coolant every three years. Since the Aqua Hot and Oasis systems use the same fluid, it’s important to follow this schedule to ensure the longevity and optimal performance of your system.
The Process of Draining the Old Fluid
Draining the old fluid from your Aqua Hot system is the first step in the fluid change process. The narrator in the video demonstrates how to locate the valve for draining the fluid and explains how to connect a clear plastic hose for the draining process. It’s important to drain the fluid into gallon jugs or containers to properly dispose of it later.
Refilling with Distilled Water
After draining the old fluid, it’s time to refill the system with distilled water. The use of distilled water is highly recommended to avoid introducing minerals back into the system. The narrator suggests filling the system through the bottom using a clear plastic hose and a funnel. This method allows the air to be pushed up and out of the system, ensuring proper circulation of the new fluid.
Using Distilled Water to Avoid Introducing Minerals
Using distilled water during the fluid change process is crucial for maintaining the integrity of your Aqua Hot system. Ordinary tap water often contains minerals that can cause build-up and potentially damage the system over time. By using distilled water, you can prevent the introduction of these minerals and ensure the long-term functionality of your system.
Running the Aqua Hot System for Proper Mixing
Once the system has been refilled with distilled water, it’s important to run the Aqua Hot system for a period of time to ensure proper mixing of the fluid. The narrator advises allowing the system to run for a while to ensure that the fluid is thoroughly mixed and that any remaining air bubbles are eliminated. This step is crucial for optimal performance and efficiency.
Adding the New Century Fluid
After the system has been properly mixed with distilled water, it’s time to add the new Century fluid. The narrator advises following the instructions provided by the manufacturer for the proper amount and method of adding the new fluid. It’s important to note that different Aqua Hot systems may have specific requirements, so it’s crucial to refer to the manufacturer’s guidelines.
The Resulting Mixture Indicates Success
Once the new Century fluid has been added, the narrator points out that the resulting mixture should be a green color. This indicates that the fluid change process has been successful and that the system is now filled with the correct fluid. A proper mixture ensures that the Aqua Hot system functions at its best and provides reliable heating and hot water.
Time and Complexity of Fluid Change
The narrator mentions that the fluid change process in an Aqua Hot system is a straightforward job that takes a couple of hours to complete. While it may seem like a time-consuming task, it’s important to remember that regular maintenance and fluid changes are essential for the longevity of your system. By dedicating a few hours to properly changing the fluid, you can avoid potential issues and enjoy the benefits of a well-maintained Aqua Hot system for years to come.
In conclusion, running the Aqua Hot system for proper mixing of fluid is crucial for the optimal performance and longevity of your system. By following the correct process, using distilled water, and adding the new Century fluid, you can ensure that your Aqua Hot system operates efficiently and provides reliable heating and hot water. Remember to refer to the manufacturer’s guidelines and schedule regular maintenance to keep your system in top-notch condition.