- The area of the home is too large, and the wireless will be weaker if the distance is farther?
- Multi-sided walls block, the signal is always intermittent? There is always a signal blind spot?
- With the existing wireless router at home, it can expand the wireless signal at high speed.
- Balconies, kitchens, bathrooms… where the router can’t reach, the signal will be full from now on!
- Up to 1200Mbps transmission rate
- Two working modes of relay/AP
- WPS one-key encryption button
- Network port supports wired access
- Lightweight design, beautiful and portable
- Four external antennas make the relay signal more stable
- Simple and friendly operation interface, eliminating tedious configuration
- Powerful expansion capability, ultimate high-speed WiFi enjoyment.
- Powerful hardware configuration, exert stronger wireless performance.
WiFi Range Extender (Repeater)-Extend the WiFi coverage of existing wireless networks.
- Relay mode: Extend the coverage of the existing WiFi network.
- AP mode:Allow multiple devices to share the same wireless network.
- Step1: Click repeater mode to enter the network search page.
- Step2: Select the wireess signal you want to expand. if it is a hidden network, you need to ade it manually.
- Step3: Enter your router connection password and click “NEXT””.
- Step4: Click the “Finish” button to complete the relay mode configuration.
- Step5: Complete Repeater Mode setting.
2.4 & 5GHz Dual Band
Q1: How to get a better WiFi signal?
- Please place the extender close to the router first. After the setup is complete, move it to an area with weak signal for expansion.
Q2: What should I do if my extender disconnects frequently?
- If the extender is disconnected frequently, please shorten the distance between the router and the extender.
Q3: What should I do if the repeater is connected well and the Internet speed is slow?
- Check the status of the amplifier extension light. If it is red, move the amplifier position until the extension light is green. We recommend placing the extender in the middle between the router and the WiFi dead zone.
Q4: If I need to reconfigure the extender, how to reset it?
- The reset button is on the side of the extender. Please press and hold the reset button for 10 seconds and then release it. Wait for the factory settings to be restored. When the system light turns off and then lights up again, you can start resetting.
Make sure this fits by entering your model number.
➤【1200Mbps Stable high-speed signal】 This wireless network extender can be used with any 802.11b/g wireless Internet router with a transmission speed of up to 1200Mbps. This 5GHz and 2.4GHz dual-band WIFI range extender can expand the existing Wi-Fi signal The range eliminates dead ends at home and outdoors, and creates reliable high-speed Wi-Fi without interference.
➤【4 antennas and wired Ethernet port】 This WiFi repeater is equipped with 4 high-gain external antennas, which can eliminate blind spots and expand existing WiFi coverage, extending wireless signals to areas that were previously inaccessible or difficult to wire. The Ethernet port allows wired connection between the router and the WiFi extender, and even between the cable modem and the WiFi extender.
➤【Multi-mode Application】The ventilation holes on both sides of the repeater greatly improve the heat dissipation capacity of the wifi repeater, making it more convenient to use. AP (Access Point) mode can cover the entire network; repeater mode extends the coverage of existing WiFi networks. 360-degree high-speed connection and coverage can provide satisfactory high-definition video browsing and online games.
➤【Extend your WIFI coverage】This WiFi Range Extender can extend your existing WiFi coverage, such as bedrooms, corridors and bathrooms, and run under dual-band, extending the coverage of dual-band signals to every household Corner to provide a strong and reliable network for the entire family!
➤【Easy to install】Plug and play, no need to install any software for this wifi booster. Follow the user manual and you will find that your phone and PC settings are very simple. In order to make it as easy to use as possible, its LED light clearly shows the status of the extender, making it easy to install. It also has a wifi signal indicator to help you find the best extension location.