EasyStart – The most advanced & effective soft starter for all A/C applications EasyStart is a one-of-a-kind, custom-developed soft starter for single-phase motors. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor’s LRA (locked-rotor amperage). EasyStart is the perfect solution that allows an air conditioner or refrigeration compressor to operate on a generator, inverter, or limited utility power when it would otherwise not have functioned. It can also be applied to air compressor and fluid pump motors.
Make sure this fits by entering your model number.
Easy Start your A/C without buying a second or bigger generator or inverter; Add an A/C unit at low cost by putting an inexpensive EasyStart on each. Avoids expensive rewiring of the entire RV to upgrade to 50-amp.
Run 2 air conditioners on a 30-Amp cord. (Note: Each A/C requires an EasyStart unit); Convenient installation kit for wiring an RV Rooftop A/C unit is available. (sold separately)
Sleep, with less noise, and cool all through the night; Has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor.
Run your A/C with more appliances at the same time; capable of supporting up to a 36000 BTU (3 ton) compressor. It includes a unique water resistant and UV protected enclosure with an integrated mounting flange.
Model # ASY-364-X20-IP; Supports only 115V/50-60Hz motors; 20kBTUs; 25 FLA (RV only); Voltage: 100-125VAC (50-60Hz); Enclosure: 7.64L x 3.58W x 2.50H in; Harness: 40 in (1m); 70% avg reduction from LRA (locked-rotor); Quieter & Smoother starts; Superior and different than a “hard start”; Start & run your A/C from a EU2000i in ECO Mode; Start & run 2 A/Cs on a 30A campsite hook-up; Works w/ with pure/modified sine inverters; Enhanced fault detection to protect compressor; IP65 weatherproof